Boogey Lights Motorcycle Lighting, Motorcycle LED Lights, Motorcycle Lights, Motorcycle LED Lighting

LED Step & Courtesy Lights
The 3-LED step lights and 4-LED courtesy lights are now offered in a limited selection of colors while supplies last. They've been replaced by our new TNT Series LED pods; a better product at the same low price.

Our TNT Sticks & Grenades are low cost LED pods that produce explosive lighting effects. They are indestructible and produce a very bright, even glow. You've got to see them to believe them!

5-LED Step Light
Fixtures have 36" wire leads, enclosed in a black sleeve.
Case style available in black or chrome.
Dimensions: L=2 5/8" x W=3/8" x H=5/8"

If you have a special offer promo code, click here to enter your code before placing your order.

Red or Amber
$ 12.49

Blue, Green, White, Orange or Purple
$ 17.99

* A note about PURPLE LEDs: All purple LEDs on the market today are actually ultra-violet (U/V) and produce a very soft purple glow on your engine. U/V LEDs produce a very beautiful purple effect, but it's not a real bright effect like you'll get with red, blue, green, orange, etc. If you want a subtle purple glow that looks great, then the U/V LEDs may well be for you. If you want the brightest ride on the block, you won't be happy with purple. One other thing, you don't want to look directly at any U/V light source, as the U/V rays can be damaging to your eyes.

LED Wiring Kit and Additional Hook-up Accessories
Purchase a complete wiring kit, or just some extra tape and promoter. We also offer our switch, and stainless steel wire braid for covering black wire, as well as chrome zip ties to attach the wire to your steel braided brake lines. Also, check out our front wheel wiring kit for easy brake caliper hook-up using either a MEGA TNT Stick or 5-LED Step Light Pod. Click on pictures to view close-up of components. Includes installation instructions. To add more lights, simply purchase additional tape & promoter.

LED Wiring Kit

Everything you need to install 6-8 LED fixtures.

On-Line Price: $ 20.00

Wiring Kit with
on/off remote control switch

Now with 2 remotes!

Same LED wiring kit PLUS remote control switch.

On-Line Price: $45.00

Wiring Kit Contents: (click for picture)

> Pushbutton Switch <
- Black weatherproof pushbutton switch with 12" black leads and rubber boot easily installs on any flat 1/2" x 1/2" surface using the 3M tape.

> Fuse & Power Hook-up <
- Mini-blade fuse holder with 5 amp fuse.
- Black ground lead extension.

> Tape & Promoter <
- 24" 3M double-sided VHB tape.
- 2 packets 3M automotive adhesive promoter.

> Tie Wraps & Mounts <
- 2 adhesive backed tie wrap mounts.
- Six (6) 6" tie wraps for mounts and to tidy up wires under the seat.

> Connectors & Heat Shrink Tubing <
- Two (2) yellow butt connectors for connecting red and black leads under seat.
- 2 pieces 1/2" adhesive lined heat shrink to cover yellow butt connectors.
- 3 blue butt connectors to connect switch leads to fuse and red light leads.
- 3 pieces 1/4" adhesive lined heat shrink to cover blue butt connectors.

> Installation Instructions and Wiring Diagram <

Additional Hook-up Accessories

3M Promoter & Tape

12" 3M VHB tape & promoter packet to install an additional 6-8 fixtures.

On-Line Price: $ 3.39

3M Promoter

Single 3M promoter packet. A must have to ensure maximum tape adhesion.

On-Line Price: $ 1.79

Pushbutton Switch

Black weatherproof pushbutton switch with
12" leads and waterproof rubber boot.

On-Line Price: $ 2.99

3M double-sided VHB Tape

12" of 3M double-sided VHB tape.

On-Line Price: $ 1.59

Wiring your Wheel Lights - watch the videos below to see how it's done. (even more video here)
Use either or 5-LED step lights or our new MEGA TNT Sticks to light the wheels, depending on color.

Blue, purple and white must use 5-LED step lights to properly match the color of our Cut N' Click flexible LED strips. When using red, orange, green or amber you can use either our ultra-bright MEGA sticks or the less expensive 5-LED step. Both styles match the flexible strip colors perfectly.

Lighting Your Front Wheel

Front Wheel Wiring Kit

Everything you need to extent the LED wire leads from the front wheel back to underneath the seat.

8 feet LED wire
8 inches 3M tape
(1) 3M promoter tube
(10) 4 inch black zip ties
(4) 1/8 inch heat shrink pieces

On-Line Price: $ 5.99

------------------------------

Chrome Zip Ties

8" Chrome zip ties
These do not dry out or break like the smaller ties sold by others.

Bag of 10
$ 6.50

Covering the LED wires with Steel Braid

Stainless Steel
Wire Braid

Slips over black wire for attractive finish when wiring front wheel with steel braided brake lines. Push together to open, slide over wire, pull on ends to close tight around wire, just like "Chinese handcuffs."
Includes 6' of steel braid and 2 pieces of heat shrink tubing for ends.

On-Line Price: $ 9.99

LED Limited Lifetime Warranty
Boogey's LED lighting products have a lifetime warranty to the original purchaser. This warranty covers any defect in material or workmanship that causes any of the LEDs not to light. This warranty does not cover damage to the fixture from misuse or abuse, as determined by Boogey. This warranty is not transferable.

Defective LED products are to be returned to Boogey, Inc. postage paid for warranty replacement consideration. Replacement is limited to the defective fixture or strip only. Replacements are limited to color or materials available at time of replacement.

This warranty is limited to LED fixture or strip replacement only, and does not cover any loss of use or any coincidental loss.

This warranty does not cover any shipping charges to or from Boogey, Inc.