Installation and Hook-Up Supplies

LED Wiring Kit and Additional Hook-up Accessories
Purchase a complete wiring kit, or just some extra tape and promoter. We also offer our switch, and stainless steel wire braid for covering black wire, as well as chrome zip ties to attach the wire to your steel braided brake lines. Also, check out our front wheel wiring kit for easy brake caliper hook-up using either a MEGA TNT Stick or 5-LED Step Light Pod. Click on pictures to view close-up of components. Includes installation instructions. To add more lights, simply purchase additional tape & promoter.

click photo above for larger image

LED Wiring Kit
Now includes LEVER-NUTS™ connectors

Everything you need to install 6-8 LED fixtures.

On-Line Price: $ 20.00

LED Wiring Kit with
on/off remote control switch

Now with 2 remotes!
+

Same LED wiring kit PLUS remote control switch.

On-Line Price: $45.00

Wiring Kit Contents: (click for picture)

> Pushbutton Switch <
- Black weatherproof pushbutton switch with 12" black leads and rubber boot easily installs on any flat 1/2" x 1/2" surface using the 3M tape.

> Fuse & Power Hook-up <
- Mini-blade fuse holder with 5 amp fuse.
- Black ground lead extension.

> Tape & Promoter <
- 24" 3M double-sided VHB tape.
- 2 packets 3M automotive adhesive promoter.

> Tie Wraps & Mounts <
- 2 adhesive backed tie wrap mounts.
- Six (6) 6" tie wraps for mounts and to tidy up wires under the seat.

> LEVER-NUTS™ Connectors
& Butt Connectors <
- Two 3-slot LEVER-NUTS™ connectors
for positive and negative wires
- One blue butt connectors to connect switch leads to fuse and red light leads.
- One piece 1/4" adhesive lined heat shrink

> Installation Instructions and Wiring Diagram <
Instructions will be soon be updated
with LEVER-LOCKS™ connector info.
See photos below for quick reference.
Click on photos for a larger image.

Wiring Diagram without Remote Control

Wiring Diagram with Remote Control

Additional Hook-up Accessories

3M Promoter & Tape

12" 3M VHB tape & promoter tube to install an additional 6-8 fixtures.

On-Line Price: $ 3.39

3M Promoter

Single 3M promoter tube. A must have to ensure maximum tape adhesion.

On-Line Price: $ 1.79

Pushbutton Switch

Black weatherproof pushbutton switch with
12" leads and waterproof rubber boot.

On-Line Price: $ 2.99

3M double-sided VHB Tape

12" of 3M double-sided VHB tape.

On-Line Price: $ 1.59

Wiring your Wheel Lights - watch the videos below to see how it's done. (even more video)
Use either or 5-LED step lights or our new MEGA TNT Sticks to light the wheels, depending on color. Blue, purple and white must use 5-LED step lights to properly match the color of our Cut N' Click flexible LED strips. When using red, orange, green or amber you can use either our ultra-bright MEGA sticks or the less expensive 5-LED step. Both styles match the flexible strip colors perfectly.

Lighting Your Front Wheel

Front Wheel Wiring Kit

Everything you need to extent the LED wire leads from the front wheel back to underneath the seat.

8 feet LED wire
8 inches 3M tape
(1) 3M promoter tube
(10) 4 inch black zip ties
(4) 1/8 inch heat shrink pieces

On-Line Price: $ 5.99

------------------------------

Chrome Zip Ties

8" Chrome zip ties
These do not dry out or break like the smaller ties sold by others.

Bag of 10
$ 6.50

Covering the LED wires with Steel Braid

Stainless Steel
Wire Braid

Slips over black wire for attractive finish when wiring front wheel with steel braided brake lines. Push together to open, slide over wire, pull on ends to close tight around wire, just like "Chinese handcuffs."
Includes 6' of steel braid and 2 pieces of heat shrink tubing for ends.

On-Line Price: $ 9.99